BCC Interior Emulsion

BCC Interior Wall Emulsion is a very economical interior emulsion which gives a durable, smooth and rich finish
Apply first coat of BCC Interior wall primer WT or Surfacer White
Primer ST and allow it to dry. Apply acrylic based or cement wall putty to level surface imperfections and allow drying for 4-6 hours. Sand with emery paper 180 and wipe clean. Apply second coat of primer and allow it to dry. Sand the surface with emery paper 320 and wipe clean

Features Description
Areas of Application Ceiling and Plaster / Brick work / Asbestos cement sheet / hard and
soft boards etc.
Drying Time Depends upon condition of temperature and Humidity.

Touch Dry: 10-15 minutes

Recoating Interval: 3-4 hours
Thinner Clean Water
Finish Smooth and Matt
Coverage Coverage will vary according to the porosity and texture of surface. On normal and smooth surface the coverage will be 22-28 2 p / coat
Application Brush / Roller / Spray
Shade White
Clean Up Clean all equipment with water immediately after use
Packings 20 It / 10 It / 4 It / 1 It
Material Handling Store in a cool & dry place;Stir contents well and strain before use Tightly container when not in use Do not over thin or over extend the brush

BCC Premium Interior Emulsion

Luxury emulsion which has a rich, satin and smooth finish which maintains a fresh look for years and having excellent covering and durability
For desired results, proper surface preparation is very important. Freshly plastered surface should be
fully cured and completely dry at the time of painting. All surfaces must be sound, dry and free from dust, dirt, grease, wax, chalky or loose paint, rust, mildew, efflorescence, algae or fungus or any other contamination that would adversely affect the performance of the coating. All cracks and voids or minor damages should be filled by using mixture of white cement and fine sand in the ratio of 1 : 3 before application of primer / paint.

Features Description
Areas of Application Ceiling and Plaster / Brick work / Asbestos cement sheet / hard and
soft boards etc.
Drying Time Depends upon condition of temperature and Humidity.

Touch Dry: 30 minutes

Recoating Interval: 3-4 hours
Thinner Clean Water
Finish Smooth with a slight sheen
Coverage Coverage will vary according to the porosity and texture of surface. On normal and smooth surface the coverage will be 18-22 2 / ltr / coat
Application Brush / Roller / Spray
Shade White
Clean Up Clean all equipment with water immediately after use
Packings 20 It / 10 It / 4 It / 1 It
Material Handling Store in a cool & dry place;Stir contents well and strain before use Tightly container when not in use Do not over thin or over extend the brush

BCC Ready Mix Plaster

BCC READY MIX PLASTER is a ready made mixture of Cement & Silica with right composition of high quality polymer additive. BCC READY MIX PLASTER is specially designed for use with water to provide stronger and more durable plaster with excellent strength.
Method of Application :-
Pre-wetting of surface is required before applying plaster. Clay brick masonry wall, should be saturated one day before. Apply the mix to the surface using a trowel in a smooth even motion working from the base of the surface upwards to reduce wastage.
Preparation of BCC Ready MIX PLASTER
Add approximately,add water and 7-8 liters of water per 40 kg bag of BCC READY MIX PLASTER. Mixing should be done for 5- 10 minutes depending upon the speed of the mixing equipment.The correct ratio of water and BCC READY MIX PLASTER is essential for better results.

Features Description
Appearance Greyish granular dry powder
Packaging 1/5/20/40 kgs bags
Storage Conditions Dry
Shelf Life 6 Moths in unopended manufactures packing
Max. Aggregate Size < 1.5 mm
Water Requirement approx. 3 Liters for 20 kg. bag
Pol Life 1 Hour
Hard Dry 24 Hour
Coverage 8 Sqft / 20 kg bag @ 10mm thickness
As per IS : 15477-2044 & IS 4031-(Part-6) 1988
Curing Time 3-4 Days
Compressive Strength @ 28 Days > 9 N / mm
Durability Intial surface absorption-NIL

BCC Tile Adhesive

BCC Tile adhesive is grey cement based high polymer modified quick set tile adhesive. It gives excellent bond on cementitious surfaces like concrete, plaster, etc. BBC Tile Adhesive forms a waterproof barrier between two surfaces and has excellent “grab” properties.This is an ideal product for tile fixing applications. BCC Tile adhesive is used for fixing all types of tiles on interior & exterior use like external wall,floor, kitchen, bathroom wall I, corridor, lobby, meeting rooms, halls etc.

Features Description
Description BCC Tile Adhesive-GP is a polymer based cementtitious general purpose tile adhesive. It can be used as a thin or thick bed adhesive for fixing ceramic, mosaic, marble, granite, and wall or floor tiles.
Advantages Good water resistance

Excellent adhesion on concrete or plastered surfaces

Permanent Tile fixing

Chloride free

Non-toxic and suitable for drinking water contact

Most economical and good performance levels

As the applied material will be covered with tiles, hence no curing is required

Uses Bonding ceramic wall tiles and mosaic tiles for exterior and interior floors and walls in bathrooms, toilets, shower recesses, laundries and swimming pools. Can be most suitably applied over rendered brick work, brick masonry and concrete surfaces.
Properties Appearance:Grey Powder

Colour:Generally Grey

Mixing Ratio:3-4 parts powder(by wt)to be mixed with 1 part of water

Coverage:About 2.5 to 3 kg material is required to cover area of 1mm with 3mm thick when applied with a notch trowel

Working Time:30-60 minutes (approx)

Curing:No curing required as material is covered with tiles
Cleaning Uncured material may be removed with water. Hardened material may be removed mechanically
Application Surface Preparation:The surface must be structurally sound, level and free from excess moisture, grease. All plastered surfaces should be finished with a wooden float. Dampen all porous surfaces with water and wipe off excess water before the application of tile adhesive

Wall Application:Spread the cement based adhesive as mixed on
the surface using a 3 mm notched trowel when laying ceramic wall tiles. Do not spread the ready material more than 1mm at a time. If the adhesive dries due to excessive delay in affixing the tiles, remove the dried adhesive and comb out a fresh layer. The underside of the tile must be made in good contact with the adhesive by twisting each tile slightly on the adhesive bed or tap the tile carefully with the handle of a hammer while the positioning of the tile is being carried out. When laying out large areas, care should be taken to make provision for expansion joints both vertical and horizontally

BCC P.O.P

Bcc Plaster of Paris

BCC Plaster of Paris consists of gypsum hemihydrates treated with high purity gypsum and additives to achieve strength, durability and extra coverage.This product is most suitable for application on internal plastering systems like pruning of walls and ceilings, decorative designs like cornices, roses, moulding,arches as well as in false ceiling systems.

Superior whiteness of this plaster assures aesthetics of interiors and our microbic Grinding Method provides extra fineness, resulting in flawlessly smooth finish that will exceed your expectations.

The products guarantee consistency in terms of quality, setting period, coverage, purity and weight, batch-after-batch

Technical Specification

Parameter Performance
Setting Time (min.) 15-20
Density kg/mmm 800
Coverage in sq. ft./25 kg (8mm) 30
Whiteness (%) 80
Fineness (%) 99
Manufacturing in House
ISO Certified

Advantage

– Extra whiteness makes it a perfect choice for making aesthetic designs

– Advanced technology and machinery used in manufacturing
– Better fineness due to Micronics Grinding method
– High purity Gypsum for strength and durability
– Free from silica and other impurities
– Consistency in Quality
– Superior coverage
– Smooth finish
– Economical
– Crack free

BCC Wall Care Putty

BCC Wallcare Putty is a premium quality, water resistant (interior & exterior) wall putty which is based on carefully selected cement fillers and polymers for concrete / plastered walls and ceilings. BCC Wallcare Putty has been developed after vigorous R&D and field trials. BCC Wallcare Putty can be used for smoothening and repairing walls, ceilings and floor surfaces. This can also be used for levelling and small undulations of substrate surfaces.

Features Description
Areas of Application Concrete / Plaster, Interior and Exterior walls.
Drying Time Depends upon condition of temperature and Humidity.

Touch Dry: 30 minutes

Recoating Interval: 3-4 hours
Thinner Clean Water
Finish Smooth and Matt
Coverage 2 – 2.75 2kg / mm in two coats. This may vary subject to condition of substrate
Application By putty bIade or steel trowel
Shade White
Clean Up Clean all equipment with water immediately after use
Shelf Life 6 months from the date of manufacturing in original sealed condition
Packings 40 kg / 20 kg / 5 kg / 1 kg
Material Handling Store in a dry place away from moisture and rain
Technical Data Tensile Adhesion Strength 23 kg / cm2

Compressive Strength at 28 days 180 kg / cm2

BCC Cement

THE BCC CEMENT PVT. LTD

BCC Cement was launched in the year of 2007,& achieved profound success in the short. BCC Cement an ISO 9001: 2008 Certification company production facilities with well equipped labs to ensure Quality parameters.

BCC Ordinary Portland Cement :

BCC Ordinary Portland cement is available in 33, 43 and 53 Grades. Available in the 43/53 graded cement are preferable, as it ensures complete reactivity and resulting in smooth, dense and water tight concrete, averting problems of corrosion and seepage. BCC Ordinary Portland cement is obtained by grinding the Clinker with 2% to 5% Gypsum.These are ground in an open or closed circuit ball mill to a desired fineness of 350-400 M2/kg.

BCC CEMENT FEATURES

Quality control :

Rigorous quality control by a team of experts with hourly sampling makes BCC Cement nearly flawless.This careful analysis and quality control,from raw material to the final product,ensures highest standers of quality.

Better clinkerisation :

Higher clinker speed pre-heater equipped with pyrotop technology enables better clinkerisation and superior clinker quality.

Superior grinding :

Using the latest roller press and cement mill technology, equipped withVSK separator gives BCC Cement optimum fineness with consistent particle size distribution.

Qualified plant operators :

Qualified engineers who are specially trained at the KDH facility look after all the aspects of plant operations.

COMPRESSIVE STRENGTH

Comparison of BCC CEMENT with Indian Standards (OPC 43 Grade)

Physical Properties Fineness (Blaine’s), mm/kg Our offering 390 (IS-8112-1989) 225 Min.
Setting Time (Minites
IST Not less than
FST Not More than
65 Mins
125 Mins
30 Minutes
600 Minutes
Compressive Strength (MPa)
3 Days (Minimum)7 Days (Minimum)
28 Days (Minimum)
25 Mpa
36 Mpa
44.5 Mpa
23 Mpa
33 Mpa 43
Mpa
Expansion (mm)
Not more than
1.0 mm
0.16%
10 Max.
0.8 Max.
Dry shrinkage (mm)
Not more than
0.05-0.10 (% by wt.) 0.15
Chemical Properties:
Loss on ignition (%By Mass)
Magnesia (Mgo) (%By Mass)
Insoluble residue (% By Mas)
Sulphur Trioxide (So,) (% By Mass)
Chlorides (% By Mass)
1.32 %
2.47 %
1.91 %
1.75 %
0.012 %
5.0 %
6.0 %
3.0 %
3.0 %
0.1 %